7 mistakes we make that may cause the destruction of electrical devices when connected to the electricity subscriber
 |
| 7 mistakes we make that may cause the destruction of electrical devices when connected to the electricity subscriber |
The 1980s ushered in the age of the computer, and it was also the first time we needed electrical conductors, or otherwise known as "electrical joints."In order to be able to connect the main power port of the computer (power cable) and the monitor cable and perhaps for the paper printer, but time is passing and technology does not stop in its place and continues to flourish and progress and quickly impose many challenges and power requirements and all users have many external storage drives and scanners Routers and some other peripheral accessories that may all need additional power outlets, a little later came laptops, tablets, smartphones, and many wireless Bluetooth devices, all of these devices played a key role in making human life easier and allowed him to experience an exceptional use And it enhanced his production capacity and helped him to carry out his professional work better than before, but the only common factor in all the devices we mentioned above is that they need the transformer or the electrical joint.
The adapter and the electric subscriber have had a share of technological development and today there are some devices that contain USB ports and have protection from diamonds and dangerous electric lightning and are able to deal with high current, but of course, not all of us have them because of their high prices and unavailability in commercial markets in common despite being necessary Very, most of us only have the traditional commercial electric subscriber because we think that it is sufficient for the purpose and more than enough to connect a large number of our devices at the same time. The problem is that we sometimes deal with these devices wrongly. Unfortunate disasters such as the occurrence of a short circuit may result in the destruction of the devices connected to the electrical subscriber, but in the worst scenarios, it may cause a devastating fire, in this article we will highlight the wrong ways of using the electrical subscriber that may result in serious problems to protect you from allits risks.
Errors that cause the destruction of electrical devices when connected to the electricity subscriber
1. Do not connect one electrical subscriber to another
Connecting an electrical joint to another means that you are adding an additional load from the electrical current to both transformers, this additional load from the electrical current may cause the temperature of the electrical joint to rise very dangerously to the extent that it may corrode and melt the plastic cover from the outside and in the worst circumstances may result in A fire, in some other cases, this process may result in a short circuit, which may cause the devices connected to the electrical subscriber to burn out.
This happens all the time, especially when you rely on poorly made and inexpensive commercial electrical connectors, so it's important to check the power requirements for all your appliances and to make sure that the electrical joint is UL rated, which means it has high-quality copper conductors and capable wires. To withstand high voltages and high temperatures, if you find that the electrical subscriber is not UL certified, this means that it has not been tested by the power authorities and is not reliable for the electrical load.
2. Do not attempt to connect high-current devices to the mains
There are some electrical devices that require a very high electric current, such as clothes irons, hair dryers, electric air conditioning and some other devices. The best scenario for these devices is that they are connected directly to the electrical socket located in the wall of the wall. As for the electrical subscriber, it is not designed to withstand this high amount of electrical current. electric current.
These devices draw a very high current and their iron sockets heat up very quickly, which can cause the electrical joint to burn out and cause a serious fire. Therefore, always try to be sure of the amount of power that your electrical appliances require and the amount of power that the electrical subscriber can pass to other devices. If it becomes clear to you that the minimum From the power requirements supported by the electrical subscriber is not sufficient for your other devices, it is better to stay away from this subscriber and look for another more capable subscriber or, of course, connect these devices directly to the wall socket.
3. Do not leave the electric joint near your pets
Cats are one of the most pets that prefer messing with everything around them, and dogs are often curious, especially because of the light emitted by the electric joint bulb, your pets tampering with the electric joint is very dangerous, also you should not leave the electric joint within reach Your young children, while it is not entirely a good idea to cover up the electrical joint but at the same time you should not leave it in the open where it is easy for your pets or children to reach and mess with it.
In case you did not know, the electric joint was not manufactured as permanent power solutions, but rather it was made to be temporary power solutions only, meaning that it is better once you have finished using it, to disconnect it directly and cut off the power from it.
4. Do not use the internal electrical joint in external power sockets
There are some electrical joints and connectors that are manufactured in order to withstand external conditions and harsh environmental factors such as high sun temperature, precipitation or even low temperatures. As for the internal electrical conductors, they are not qualified to withstand these external factors and therefore it is better not to use them in power sockets The external in your home from the outside, except in one case, which is to make sure that this subscriber is already qualified to withstand external weather factors, but even the external power connectors come with certain limits of water resistance and temperature, so you should check these things before you buy any subscriber An electrician especially if you plan to use it outside your home.
5. Do not use the damaged electrical joint
Some power connectors may cause a short circuit and cut off the power to one of the power outlets built into it and therefore cut off the power to the devices connected to it, in this case this means that the electrical subscriber has broken and stopped working and it is better not to rely on them later But if you want my personal opinion, it is better to stop using this plug entirely because as long as it causes a short in one of the outlets, it is very likely that it will cause a short in one of the other outlets so, it is better to stop using this joint until you can buy a replacement one for him.
6. Do not attempt to connect the following devices to the electrical subscriber at any cost to you
As we mentioned to you in the previous paragraphs, there are some high-frequency devices that draw a very high electrical current and should never be connected to the electrical subscriber because the electrical subscriber is not qualified to withstand this amount of current. These devices include refrigerators, air conditioners, washing machines, water heaters, dryers, clothes irons, microwaves, and appliances Freezing and even chassis makers, these devices draw very high electrical current and thus cause the two electrical conductors to overheat, which can easily melt and burn the plug sockets.
7. Do not try to hide the electrical joint behind the curtains or under the carpet
Sometimes a short circuit of the power may result in a short circuit, and this diamond means sparks come out of the power outlets, and certainly these sparks may cause a fire immediately if you keep the electric subscriber behind curtains, under carpets or under a stack of papers. But even if no sparks occur, the electric joint is known to heat up quickly when it is in operation and this high temperature is a danger if it is near any fabric materials.